AD100 / MVP Optional Items |
The following is a list of equipment that owners of the AD100, MVP & AD100Pro may wish to purchase, to increase the functionality of their tester.
AD100Pro / MVPPro User Manual 
Comprehensive manual with key programming step by step guide for all applications. Includes socket location, general operation, special functions, tips and hints and remote control programming.
This manual is suppied FOC with all new AD100Pro / MVPPro purchases. This manual is restricted to AD100, AD100Pro, MVP and MVPPro owners.
Security Calculator for AD100Pro & MVPPro 
Coded access systems consist of obtaining a challenge code from the vehicle which needs to be converted into a response code that the vehicle will recognise, therefore allowing access to the programming function to be performed.
Currently, the response code is generated via the Advanced Diagnostics website, which obviously requires an internet connection.
The Security Calculator allows response codes to be generated without the need for an internet connection (although there are a couple of systems that will still require the rsponse code to be generated by the AD website).
Systems Covered
Ford Coded
Mazda Coded
Fiat / Alfa / Lancia 2008
Honda / Acura Coded
Jaguar Coded
Opel / Vauxhall Coded
Mitsubishi Coded
Toyota / Lexus Coded |
|
AD Website Only Systems
Chrysler Skim Type 2 (MVP Pro)
Ssangyong |
The Security Calculator comes FOC with all new AD100Pro and MVPPro purchases.
Smart Cards
The security calculator comes complete with 2 Smart Cards. Smart Cards slot into the side of the security calcualtor, enabling it to be used. Each Smart Card allows the security calculator to be used a total of 2500 times (after 500 uses, it will be require reloading via the Advanced Diagnostics website). After 2500, the card will need to be replaced.
ADC250 AD100Pro / MVPPro OBD Cable with Aux Power 
On certain vehicles, power is not available via the OBD connector and requires auxillary power to be supplied. This is the case on some Rover and Suzuki vehicles, as well as vehicles who have a fault or have a blown fuse.
ADC250 integrates the standard OBD cable with an auxillary power lead. This power lead can be unplugged from the main cable when not required.
AD100Pro / MVPPro Carry case
Keep your tester and leads protected and together with this smart looking carry case.
ADC145 Test Dongle
An adaptor for your AD100 & MVP which will test the communication lines in your tester. The dongle goes through a series of tests and tells you whether your tester is operating correctly.
An ideal addition to reassure you that your AD100 or MVP is operating correctly.
AD15CP3 Sigma Remote Control Programmer
Enables new remotes to be programmed into Sigma alarm systems. Also programs the full range of parameter settings involved in the installation and repair of Sigma alarms.
Many vehicles are equipped with a Sigma alarm system. These were fitted from new on many vehicles including Subaru, Renault, BMW, Suzuki, LDV, Rolls Royce and Bentley. They are also a popular aftermarket alarm fitted to a wide range of vehicles. The AD15CP3 enables you to program new remotes into these vehicles and alarm systems.
Often it is necessary to disarm the alarm to enable keys to be programmed and the vehicle to start. Programming is achieved by an optical connection to the LED via the programmer and a step by step manual.
Battery Support Unit
When connected the BSU provides a constant voltage of 12.7V - the optimum voltage for vehicle programming. This also prevents loss of battery charge, and ensures that the battery is not discharged at the end of the job.
For full details of this essential bit of kit, click here.
ADC116 OBD Diagnostic Port Tester 
The ADC116 OBD DIAGNOSTIC PORT TESTER is the easiest and quickest way to check that the OBD port has 12 volts and good ground connections.
It also checks the PIN 7 line on VW/AUDI/ SEAT/SKODA vehicles, to make sure that if an aftermarket radio is fitted, they have wired the system correctly otherwise damage can be done to any diagnostic equipment that is connected to it.
A great cost effective time saver and stops damage to diagnostic
equipment.
Sealey IR & RF Key Fob Tester
| • |
Detects and confirms radio frequency and/or infrared emission from key fobs and remote controls. |
| • |
Helps diagnose faults quickly and easily without the need to dismantle the fob, remote or vehicle. |
| • |
Magnetic backing sticks to the side of any ferrous surface making distance test of transmitter a possibility. |
| • |
Suitable for a wide variety of vehicle and electronic/electrical applications. |
| • |
Suitable for detecting new BMW frequencies. |
| • |
Powered by 9V battery (not included). |
Autodata Technical Data
Contains valuable information on the following areas:
• Key and Remote CDL Operation
• Key Programming from Master
• Remote Control Battery Replacement Procedure
• Remote Control Manual Programming Procedure
• Plus Much More Information for Mechanics
For full details, click here
The above Autodata Technical Data 2004 Manual is also available on CD, which includes 3 upgrades per annum.
Autodata Trouble Codes
In response to questions from workshops and technicians, Autodata has produced the definitive manual for interpreting trouble codes.
For full details, click here
Megaboost
This is a high output - high quality battery powerpack, useful when the vehicle battery is low on charge.
An essential item for all AD100 users.
Extended Warranty
For a small fee you can extend the warranty of your tester for each subsequent year. The benefits are:
• Replacement loan tester for the period of the repair
• All carriage costs paid by us
• Free repair of your tester
Please contact our sales desk for more information.
