The AD100 & AD100Pro have many seperate pieces of software that allows it to communicate with many different vehicles. Please click on any of the links below to see what functions the software offers for each vehicle manufacturer.
Programs Ford vehicles from 2007 onwards (currently Transit, Mondeo & S Max) with a coded access system including the latest. Other models to be added where possible.
• Reads “out code”
• “In code” available from Advanced Diagnostic Website
Able to program all current GM systems, Petrol and Diesel up to 2005. (Vauxhall Vivaro available if Renault software purchased).
• Programming of new keys
• Remote control plip programming
• Mechanical key number identification
• Fault code reading
• Fault code clearing
• Vin No (chassis No) Identification
• ECU identification
• Indicates number of keys programmed into the vehicle
• Deletion of keys from memory if lost or stolen
• Security access codes required
Security code pin number reading on certain Systems.
•
Reads pin from most vehicles up to 1998/9 where a Fixed code transponder is used, Incs Astra F, Vectra B, Corsa B, etc
•
Reads Pincodes on later Mariva, Corsa C, Tigra B
•
Reads Pincodes with certain engines on Astra G, Corsa B, Vectra B and crypto transponders.
No requirement for dealer to issue security pass code that means programming can be carried out immediately by the roadside.
GM ECU Learn
To install a new ECU into a GM vehicle the ECU needs to be instructed to learn the vehicle the ECU is being fitted to. This software enables this task to be done.
Programs new Engine Control Units (ECU’s) Symtec 56 and 56.5 systems.
Programs Used Engine Control Units (ECU’s) Symtec 56 and 56.5 systems.
Able to program all current VAG systems to 2006. Petrol and Diesel. Includes all system 1 and system 2 security systems.
• Programming of new keys, even when all keys are lost
• Security 14 digit code identification
• Fault code reading
• Fault code clearing
• ECU identification
• Indicates number of keys programmed into the vehicle
• Deletion of keys from memory if lost or stolen.
Pincode Reading for System 2
• Security code pin number reading on certain Systems.
• Most VAG petrol vehicles 2001 - 2006
• Most Diesel VAG vehicles 2001 - 2005
VAG Pin Decode (Seat Only)
Where it is not possible to read the pincode using your key programmer, the AD100Pro will extract a special code from the vehicle. With this code you can apply online to Advanced Diagnostics for the pincode. This service costs £20 and takes approx 2 days.
Option
By purchasing an additional cable it is possible to program VW LT Commercial vehicles. See ADC137 in price list.
VAG ECU Learn
To install a new ECU into a VAG vehicle the ECU needs to be instructed to learn the vehicle the ECU is being fitted to. This software enables this task to be done.
New software to program keys and remotes to the latest vehicles with Canbus electrical systems, New Golf, Passat, Touran, Caddy, Audi, A3, A4, A6, A8, Seat Leon, Altea, Toledo, Skoda Octavia up to approx. 2007.
To install a new ECU into a Rover vehicle the ECU needs to be instructed to learn the vehicle the ECU is being fitted to. This software enables this task to be done. The software comes as a part of the Rover package.
• Covers Engine Management systems Mems 1.6, 1.9, 2J & 3
• Programs new Engine Control Units (ECU’s)
• Programs Used Engine Control Units (ECU’s).
Able to program systems up to 2005. Petrol and Diesel.
• Programming of new keys, even when all keys are lost
• Plip Remote Fob programming
• Fault code reading
• Fault code clearing
• ECU identification
• Indicates number of keys programmed into the vehicle
• Deletion of keys from memory if lost or stolen
• Live Data information and monitoring
• Actuator operation and status
• Service light reset on Peugeot 307
• Security access codes required
Software to program keys and remotes to the latest vehicles with Canbus electrical systems. Includes Peugeot 107, 1007, 207, 307, 308, 407, 807, Citroen C3, C4, C5 plus other models as they change to Canbus technology.
Software to program keys and remotes to the latest vehicles with Canbus electrical systems. Includes Renault Clio, Modus, Megane, Kangoo, Traffic plus other models as they change to Canbus technology.
Software to program keys and remotes to the latest vehicles with Canbus electrical systems. Includes Micra K12 (new bubble shape) plus other models as they change to Canbus technology.
Also covers proximity systems from 2006 on Altima, Maxima, Murano, Sentra, Versa and Note.
• Fault code reading
• Fault code clearing
• Programming of new keys, even when all keys are lost
• Deletion of keys from memory if lost or stolen
• Programs Remote Controls
• Security access codes required
Able to program all current systems NATS 2,3,4,5 & 6.
• Fault code reading
• Fault code clearing
• ECU identification
• Indicates number of keys programmed into the vehicle
• Programming of new keys, even when all keys are lost
• Deletion of keys from memory if lost or stolen
• Security access codes required for vehicles from 2001 on
Able to program all system 2 immobiliser systems to 2007.
• Programming of new keys even when all keys are lost or stolen
• Programming of Remote controls
• Fault code reading
• Fault code clearing
• Deletion of old or missing keys
• Indicates number of keys programmed into the vehicle
• Live data information & monitoring
• Actuator operation and status
• Security Access codes required
• New keys must be sourced from manufacturer via chassis No
System 1 vehicles with Red master key system require a red master key and 1 additional working key to program new keys. For System I early vehicles the AD100 will program a new immobiliser unit when keys are lost.
•
Able to program all system 2 / 3 / 4 immobiliser systems to 2005 even when all keys are lost or stolen
•
Deletion of old or missing keys
•
Indicates number of keys programmed into the vehicle
Software to program keys and remotes to the latest vehicles with Canbus electrical systems. Includes Civic, CRV, Fit, S2000, Odessey plus other models as they change to Canbus technology.
Please note: some vehicles can only be programmed using the AD100Pro
• ECU identification
• Indicates number of keys programmed into the vehicle
• Programming of new keys, even when all keys are lost
• Deletion of keys from memory if lost or stolen
• Security access codes not required
Sigma Alarm Remote Programmer (Optional)
Enables new remotes to be programmed into Sigma alarm systems. Also programs the full range of parameter settings involved in the installation and repair of Sigma alarms.
Many vehicles are equipped with a Sigma alarm system. These were fitted from new on many vehicles including Subaru, Renault, BMW, Suzuki, LDV, Rolls Royce and Bentley. They are also a popular aftermarket alarm fitted to a wide range of vehicles. The AD15CP3 enables you to program new remotes into these vehicles and alarm systems.
Often it is necessary to disarm the alarm to enable keys to be programmed and the vehicle to start. Programming is achieved by an optical connection to the LED via the programmer and a step by step manual.
Software to program keys and remotes to the latest vehicles with Canbus electrical systems. Includes Kia Rio plus other models as they change to Canbus technology.
Software to program keys and remotes to the latest vehicles with Canbus electrical systems. Includes Hyundai Santa Fe plus other models as they change to Canbus technology.
• Reset Immobiliser when all keys are lost
• Programs new Master or Valet key
• Add master Key
• Add Valet Key
• Erase all keys except the key in the ignition
• Erase and program Remote plips to Lexus vehicles
• Reads fault codes
• Clears fault codes
• Reset Immobiliser when all keys are lost
• Programs new Master or Valet key
• Add master Key
• Add Valet Key
• Erase all keys except the key in the ignition
• Erase and program Remote plips to Camry & Yaris vehicles
• Reads fault codes
• Clears fault codes
Able to program keys, remotes & read some pincodes on Chrysler 300, Town & Country, Charger, Journey, magnum, Commander & Grand Cherokee vehicles from 2008.
Able to program all vehicles in the Iveco Daily range
• Programming of new keys, even when all keys are lost
• Plip Remote Fob programming
• Fault code reading
• Fault code clearing
• Indicates number of keys programmed into the vehicle
• Deletion of keys from memory if lost or stolen
• Security access codes required
The Mazda security system and Key programming is different to most other vehicles. To code a new key into a Mazda vehicle with a Lucas immobiliser system the Immobiliser box number must be entered into the AD100. The AD100 will in turn read out the immobiliser bypass system which then needs to be manually programmed into the vehicle.
The AD100 can generate the codes for all Mazdas equipped with a Lucas immobiliser box MAZDA 3 & 6 Vehicles can be coded using Ford Coded Access.
• Programs new Twice module when all keys lost
• Programming of additional keys
• Fault code reading
• Fault code clearing
• Indicates number of keys programmed into the vehicle
• Programs new Twice module when all keys lost
• Programming of additional keys
• Fault code reading
• Fault code clearing
• Indicates number of keys programmed into the vehicle
Able to program all vehicles in the Mercedes sprinter range
• Programming of new keys, even when all keys are lost
• Fault code reading
• Fault code clearing
• Indicates number of keys programmed into the vehicle
• Deletion of keys from memory if lost or stolen
• Security access codes required
Able to program keys to LDV vehicles.
Programs keys even if all lost.
Remotes are manually programmed.
Reads & clears fault codes.
No pin code required.
