Bradbury Mobile Column Lifts |
Bradbury Mobile Columns
The very reliable screwdrive with lift and safety nut is a long lasting and easy to maintain system. Ideal for cleaning and washing areas, as all control parts are based in the remote electrical control box.
In the column base, spring mounted castors allow easy movement of the columns and secure positioning when lifting.
The power control and operation module is mounted in a remote, mobile stand, allowing operation of the columns at any point within the cable length.
Various control possibilities allows single column control, single axle control or all column control.
Bradbury M8164 - 4 tonne
Set of four mobile column lifts. Each column lifts 4t capacity. For cars, light commercial vehicles and buses. Complete with 4 columns and one mobile unit control box. Can be extended up to 8 columns.
Bradbury M8224 - 5.5 tonne
Set of four mobile column lifts. Each column lifts 5.5t capacity. For cars, commercial vehicles and buses. Complete with 4 columns and one mobile unit control box. Can be extended up to 8 columns.
Bradbury M8304 - 7.5 tonne
Set of four mobile column lifts. Each column lifts 7.5t capacity. For cars, commercial vehicles and buses. Complete with 4 columns and one mobile unit control box. Can be extended up to 8 columns.
Description
Lift column head drive motor with rolled steel drive screw and bronze lift nut, superbly engineered safety cut off system. Automated drive disengagement when the lift is at its maximum height.
The motor, now mounted at the top of the column, powers the screw via an enclosed gearbox. Previous models had motor and gearbox at base of column and occasional damage occurred due to fitters standing on the motor.
Mobile power and control unit. Includes electronically controlled symmetrical lifting of the columns. Controller for selective lifting of either all 4 columns or columns per axle, or just only one column. Safety cut off breakers.
Set of four mobile columns with drive spindle, carrier/safety nut, safety cut- off, motor with direct head drive situated side top of the column, spring suspension castors on base which raise at weights below 500kg.
Mobile power and control unit. Includes electronically controlled symmetrical lifting of the columns. Controller for selective lifting of either all four columns or two columns per axle, or single columns. All power functions in one box. Main power cable with plug is pre-connected to the power box. Length 10 meters.
Four individual power cable for the columns, Length 15 meters.
Column mover
With ball head and/or hydraulic lifting action, gives the column the required manoeuvrability around all even surfaces. Stabilising screws can be engaged for uneven floors.
Technical Data
| Capacity Per Column : |
M8164 - 4.0 tonne |
| |
M8224 - 5.5 tonne |
| |
M8304 - 7.5 tonne |
| Max Height Reached : |
1700mm |
| Vehicle Tyre Sizes / Wheel Sizes : |
870 - 1080mm / 18-24in |
| Lifting / lowering time : |
140 sec/ 130 sec |
| Motor Power Per Column : |
2.2 / 3 kW |
| Power Requirements : |
400 / 50 V / Hz |
| Power Feed Per Column : |
5 x 2.5 / 25 mm² / A slow blow |
| Column Dimensions : |
1070 x 1000 x 2530 mm (WxLxH) |
| Weight / Column : |
M8164 - 520kg |
| |
M8224 - 540kg |
| |
M8304 - 580kg |
Download Brochure
Download the Bradbury Column Lift Brochure
To Order
For more information or to order this lift, please contact our sales team now on 01823 328530 to discuss your exact requirements.
