Domestic Lock Picks
A simple to use dedicated pick to quickly defeat the entire range of ABS locks.
Opens all versions:
- Rim cylinders
- Screw in cylinders
- All generations of euro cylinders including trap pins
Avocet Pioneer+ pick
A dedicated pick for the Avocet Pioneer and Pioneer+ dimple lock. These locks have trap pins which are easily picked through using this tool.
**Now with NEW Stainless Steel blade**
Brisant Ultion "D"
A dedicated pick for the Ultion and “D” section of cylinders. The pick comes with a blade for each section that can quickly be changed using the tools provided.
All new picks come with the new U12 blade that allows the tool to fit the new profile Ultions that Brisant launched around October 2017. This new U12 blade is backwards compatible with the old locks. It is also compatible with the current U13 key series.
The pick features a clicker system that helps align the picking wire above each pin to be picked. This helps more inexperienced pickers who are still getting used to feeling their way through the pin stacks. This feature can quickly be removed by loosening the screw on top of the pick. The tool then reverts to the standard configuration which allows the user to feel their way through the lock in the normal way.
The pick wire can be easily withdrawn from the tool at any time and calibrated to suit the user.
This tool can be withdrawn from the lock when it is picked, allowing the use of any type of plug spinner. This feature also means that the lock can be left in a picked state without the fear of having to leave the tool in the door where it could be damaged by third parties entering and leaving the property and knocking into the tool.
Thumb Turn wire
Taylor made profiled tip that picks up the cam in the lock like no other tool out there.
This tool opens both old and new versions of the ERA and Yale thumb turn cylinders that use the standard YA-1 profile.
Feedback from other locksmiths suggests it also opens many other makes of cylinder.
Yale BS, Era BS, SKS, UAP BS (zerolift), ICL, Zone, E*S, Iseo, LSH, new E*S M6, Securistyle BS, with trap pins. It has a spring clutch and isnt even a thumbturn (key both sides) and many more.
Mul T Lock 7×7 Garrison & 835
Dedicated pick for the Mul T Lock 7x7 Garrison, British Standard XP and Thatcham Approved restricted 835 profile found on van deadlocks and slam locks.
This pick appeals to both domestic and Auto locksmiths. The standard 7x7 Garrison and XP cylinders are common place on UK doors and commercial units and the standard Garrison can be found as basic security on van deadlocks and slam locks.
The Auto locksmith will have come across what look like Mul T Lock Garrison cylinders that existing tools will not fit. These are the more expensive restricted 835 profile cylinders that are Thatcham Approved. This one tool opens all these locks with minimal effort.
The GJ Locks Multi Pick base tool comes with 3 quick change tips to suit popular curtain locks. The following gauges are included, 7, 5.5 and 5.
The tool also comes with left and right medium picking wires and an ergonomic handle for the wires. This high precision tool is made in the UK out of the finest quality stainless steel. It has been designed to withstand heavy turning pressure, the tips have a locating plug to prevent slipping and a thumb screw that requires no extra tool to operate.
Siemens K42 Vanderbilt V42 pick
New pick for the Siemens Bewator K42 Vanderbilt V42 keypad. Enables the user to swiftly open the keypad and discover the code or alter the code for access control engineers. All this completed in a single visit. No need to order keys or change the lock.
HUK Coloured Dimple Picks
Dimple locks are proving to be increasingly popular for their greater degree of security. Traditional cylinder picks often prove unsuitable for these locks.
The HUK Dimple Pick set comprises of tools specifically designed for the manipulation of many different types of dimple locks.
A new decoder that allows the user to decode the pins in the high security GERDA TYTAN series of locks.
This amazing tool gives you the equipment to quickly open all models that share the TYTAN locking system ZX, ZE and others.
Having 4 Million Possible Key Combinations ensures the TYTAN series of locks has been an extremely secure system and the only solution was using tools priced in the thousands. Therefore opening this lock non destructively has long been out of reach of many. Until now!
A trained operative can now open this lock in well under 10 minutes using this specialised decoder. An intuitive key can then be constructed that allows for a swift opening.
The Gerda Tytan pick / decoder is now available to locksmith and other approved operators specialising in non-destructive opening.
A training manual is included in the purchase price of the tool.