Stenhoj Maestro 2.50FL 2 Post Lift
Stenhoj Maestro 2.50FL 2 Post 5 Tonne Lift
The Stenhoj Maestro 2.50FL is a top quality 5 tonne two post lift which is electro-mechanically operated.
This lift, which has an overhead portal (which can also be recessed in the ground between the posts), has a minimum height of just 140mm and also features a programmable top limit switch which allows the lift to be stopped in the same working position – every time. This means the lift can be set to and individual user’s requirements.
Additionally, with 3 stage arms all measuring over 2.1 metres in length, this versatile lift is the number one choice for lifting the longest of LWB vehicles and the smallest of cars alike. LWB sprinters and crafters are a piece of cake for this lift and there are specifically designed lifting pads available for not only this application but many others too!
ALL Stenhoj lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
Stenhoj Lifts are manufactured in Denmark
Click Here for Details
- Nut breakage system
- Obstruction system
- Automatic arm lock system
- Electronic synchronisation system
- With dead-man controls and separate main switch
- Min/Max range of arms 957/2138 mm
- Lifts all small, medium-sized and large types of passenger cars and vans
- Easy access - allows lifting of very long vehicles
|Lifting/Lowering Time||55 seconds / 55 seconds|
|Front Minimum/Maximum Arm Lengths||957mm/2138mm|
|Rear Minimum/Maximum Arm Lengths||957mm/2138mm|
|Motor Size||2 x 2.8kW|
|Power Required||3 Phase (16amp Isolator required)|
Call us now on 01823 328530 for more details