Heavy Duty Battery Testers |
Model 450 Heavy Duty 6-12V Electronic Battery Tester
The Model 450 Battery Tester is a sophisticated battery and charging system
tester with many advanced features to ensure fast and accurate analysis.
Manufactured in the UK by Traction Chargers, high quality at an affordable price.
Features
- 50 CCA to 2000 CCA battery size
- Display shows capacity in % available CCA and battery condition
- Tests discharged batteries
- Battery recharge indicator
- Starter test 12/24/36 volt systems
- Alternator Ripple Test
- Patented conductance technology
- Reverse polarity protection
- Tests 6/12v batteries including AGM and Gel
- Multiple International Units, no conversion tables needed
- Bad cell is detected and displayed
- Loose lead detection
- Surface charge warning
- Temperature compensation
Product Specifications
| Battery Size Range: |
50 to 2000 (CCA) |
| DC Voltage : |
Range/Accuracy (Volts Mode) 0.0 V to 49.9V/ +/- 2% of reading |
| International Units Displayed : |
EN, EIC, DIN, Ah (6V only), JIS |
| LCD Display : |
2 line 16 character |
| Battery cable length : |
2 ft. |
| Auto shutoff : |
Approx. 3 minutes |
| Weight, lbs : |
.95 lbs. |
| Dimensions : |
7.5”L x 3”W x 1” H |
| Internal Battery : |
9V |
Model 500 Heavy Duty 6/12/24v Electronic
Battery Tester
The Model 500 Battery Tester is a sophisticated battery and charging system
tester with many advanced features to ensure fast and accurate analysis.
Features
- 100 CCA to 3500 CCA battery size
- Display shows capacity in % available CCA and battery condition
- Tests discharged batteries
- Battery recharge indicator
- Tests Parallel & series 24v battery packs
- Starter test 12/24/36 volt systems
- Alternator Ripple Test
- Patented conductance technology
- Reverse polarity protection
- Tests 6/12v batteries including AGM and Gel
- Multiple International Units, no conversion tables needed
- Bad cell is detected and displayed
- Loose lead detection
- Surface charge warning
- Temperature compensation
- Stores test data with date and time for review and print via Infra-Red Printer Port
- Programmable print header
Product Specifications
| Battery Size Range: |
100 to 3500 (CCA) (Parallel > 1700 CCA) |
| Battery Voltage Range : |
6V &12V Batteries |
| DC Voltage : |
Range/Accuracy (Volts Mode) 0.0 V to 49.9V/ +/- 2% of reading |
| International Units Displayed : |
EN, EIC, DIN, Ah (6V only), JIS |
| LCD Display : |
2 line 16 character |
| Battery cable length : |
2 ft. chemical and abrasion resistant cable |
| IR Printer Wireless interface : |
IrDA IrHP |
| Weight, lbs : |
.75 lbs. |
| Languages : |
English, Spanish & French |
| Dimensions : |
7.5”L x 3”W x 1” H |
| Internal Battery : |
9V |
T501 Infra-Red Print Interface 
The T501 allows the users of the T500 battery tester to transfer the test information via infra-red from the tester to a PC or laptop. It is easy to install via a USB cable connection and comes with easy to install software.
This useful piece of equipment allows the information to be stored on the PC and printed as many times as required, for attachment to warranty claims, customer invoices and job cards etc, or even emailed.
Bosch BAT 121 Battery Tester
Non-loading battery test in 10 seconds with clear go/no go result. Used for starter batteries with 12V nominal voltage, identification by way of the low-temperature test current and the test procedure.
Battery voltage, starting power and battery condition are indicated during the battery test. An additional use for alternators with 12V nominal voltage is possible. The regulator voltage and the ripple of the alternator voltage are evaluated during the alternator test.
The battery tester has an easy-to-read 8-line LCD display with backlighting and documents the test results on an thermal printer than can be integrated. It is possible to choose from a variety of languages in the language selection menu.
The BAT 121 is powered by the battery to be tested and is protected against polarity reversal and overvoltage. It is also protected against dripping water falling in a vertical direction (degree of protection IP 31).
- Non-loading testing of 12 V starter batteries in 10 sec
- Menu-prompted operation
- Automatic test sequence
- Clear test results
- Independent from mains supply 8-line display with backlighting
- Optional thermal printer
- Recommended by Varta and ADAC
