Power Probe PPDM300AUTO - Automotive Digital Multimeter

The meter that reads the verdict.

The Power Probe DM300AUTO is an automotive digital multimeter with a colour TFT display and True RMS measurement, built around the tests you run on a vehicle. Alongside voltage, current, resistance, continuity, diode, frequency and duty cycle, it adds guided battery and alternator diagnostics, a cranking voltage test, and in-place fuse-current reading — one tool for most 12V/24V electrical checks.

Features and Functions

Colour TFT with True RMS and a 6000-count display for clear, accurate readings
Guided Normal and Smart Alternator charging test records voltage under load and shows a 12V/24V pass or fail
Cranking Voltage Test captures the voltage drop on start to flag a weak battery or starter connection
Colour-coded DC voltage advises on battery and alternator condition — recharge, check regulator or replace
Reads fuse current through MINI, ATC/ATO and MAXI fuses in place, plus in-line current to 10A (30A with probe)
Full multimeter: DC/AC voltage to 1000V, resistance, continuity, diode and LED test, frequency and duty cycle
Rugged CAT III 1000V / CAT IV 600V, 4 ft drop and vibration tested; runs about 50 hours on 4× AA

£339.95 + VAT

P/No. : ppdm300auto

Technical Specifications

Display	Colour TFT, 6000 counts, True RMS
DC / AC voltage	6 / 60 / 600 / 1000 V, ±(2% + 3D)
Fuse current	MINI 2–30A · ATC/ATO 1–40A · MAXI 20–80A
In-line current	1 A / 10 A (up to 30 A with probe)
Functions	V, A, Ω, continuity, diode/LED, Hz, duty, cranking, alternator
Safety	CAT III 1000V · CAT IV 600V
Power	4 × AA, ~50 h; auto power-off 15 min
Size / weight	92.6 × 205 × 57.5 mm · 588 g

What's in the box?

1× Power Probe DM300AUTO Automotive Test Meter
1× test lead set with alligator clips
4× AA batteries
1× user manual

Call us now on01823 328500 for more details